MILKFISH CULTIVATION SUPPORTS AUTOMATION OF FISH FEEDING IN THE PEN CULTURE SYSTEM
DOI:
10.5281/zenodo.20093249Published:
2026-04-26Downloads
Abstract
This study presents the design and implementation of an Internet of Things (IoT)-based automated fish feeding system for milkfish cultivation using the pen culture method. The research employed a prototype methodology, integrating microcontroller-based hardware with sensors, servo motors, and RTC modules to enable precise, scheduled, and remotely monitored feeding. Initial stages included problem identification, literature review, and system requirement analysis, followed by system design connecting multiple microcontroller devices for automatic data processing and feed distribution. The developed prototype was tested both indoors and outdoors, with monitoring via laptops and mobile devices through the Blynk application. Results demonstrate that the system efficiently automates feed distribution, reduces feed waste, minimizes manual labor, and facilitates real-time monitoring, thus enhancing operational efficiency and productivity in milkfish farming. The implementation of this IoT-based solution offers a cost-effective, sustainable, and practical approach to optimize aquaculture management, improve fish growth, and support data-driven decision-making for farmers. This study contributes to advancing smart aquaculture technologies in Indonesia.
Keywords:
Lot automated fish feeding, milkfish pen culture aquacultureReferences
Anindita, S., Mahendra, C., & Hadiyanto, H. (2022). Sistem Pemberi Pakan Ikan Otomatis Berbasis Internet of Things Dengan Wemos D1R1. Jurnal Muara Sains, Teknologi, Kedokteran Dan Ilmu Kesehatan, 6(1), 91–100. https://journal.untar.ac.id/index.php/jmistki/article/view/15163
Bidayani, E., Priyambada, A., Pertanian, F., Ekonomi, F., & Belitung, U. B. (2022). Jurnal Pengabdian Perikanan Indonesia Volume 2 , Nomor 3 , Oktober 2022 Dissemination Of Simple Technology Of Sea Cucumber (Sea Cucumber) Pen Culture System As An Effort To Overcome The Threat Of OvercapturE. 2, 144–149.
Darmansah, A., Sulistiono, Nugroho, T., & Supriyono, E. (2017). Pemberdayaan Masyarakat Melalui Pengembangan Polikultur Bandeng Dan Udang Di Desa Karangsong, Indramayu, Jawa Barat. Agrokreatif Jurnal Ilmiah Pengabdian Kepada Masyarakat, 2(2), 92. https://doi.org/10.29244/agrokreatif.2.2.92-99
Fernanda, R., & Wellem, T. (2022). Perancangan Dan Implementasi Sistem Pemberi Pakan Ikan Otomatis Berbasis IoT. Jatisi (Jurnal Teknik Informatika Dan Sistem Informasi), 9(2), 1261–1274. https://doi.org/10.35957/jatisi.v9i2.2030
Firmansyah, M. (2021). Studi Kualitas Air Untuk Budidaya Ikan Bandeng Di Tambak Kelurahan Samataring Kecamatan Sinjai Timur. Tarjih : Fisheries and Aquatic Studies, 1(1).
Fonna, M. Z., Husaini, H., & Indrawati, I. (2020). Penerapan Iot (Internet Of Things) Untuk Pemberian Pakan Ikan Pada Aquarium. Jurnal Teknologi Rekayasa Informasi Dan Komputer, 3(2).
Ilvi, I. N. D., & Masruchin, M. (2022). Peningkatan Kesejahteraan Ekonomi Masyarakat Pesisir melalui Budidaya Ikan Bandeng dalam Perspektif Maqasid Syariah ( Studi Kasus Desa Segoro Tambak). Al Iqtishod: Jurnal Pemikiran Dan Penelitian Ekonomi Islam, 10(2), 1–15. https://doi.org/10.37812/aliqtishod.v10i2.539
Iot, T., Salamah, I., & Anggielita, R. (2023). Implementasi Sistem Keamanan dan Monitoring pada Prototype Mobil berbasis Internet of Things ( IoT ) Implementation of Security and Monitoring System on Prototype Car based on. 12(September), 962–972.
Jasmadi, . (2018). Pertumbuhan Dan Aspek Ekologi Teripang Pasir Holothuria Scabra Pada Karamba Jaring Tancap Di Perairan Lairngangas, Maluku Tenggara. Jurnal Ilmu Dan Teknologi Kelautan Tropis, 10(2), 317–331. https://doi.org/10.29244/jitkt.v10i2.24047
Johan, O., Sudradjat, A., & Hadie, W. (2009). Perkembangan Kegiatan Perikanan Ikan Bandeng Pada Keramba Jaring Tancap Di Pandeglang Provinsi Banten. Media Akuakultur, 4(1), 40. https://doi.org/10.15578/ma.4.1.2009.40-44
Kurniati, A., Tantu, A. G., & Indrawati, E. (2019). Penilaian Status Pengelolaan Perikanan Budidaya Tambak Ikan Bandeng (Chanos Chanos) Dengan Pendekatan Ekosistem Di Kabupaten Sinjai. Journal of Aquaculture and Environment, 1(1), 1–7. https://doi.org/10.35965/jae.v1i1.33
Marhawati, M., & Ma’ruf, M. I. (2018). Analisis Faktor-Faktor Yang Memengaruhi Produksi Ikan Bandeng Di Kecamatan Ma’Rang Kabupaten Pangkep. JEKPEND: Jurnal Ekonomi Dan Pendidikan, 1(2), 50. https://doi.org/10.26858/jekpend.v1i2.6663
Nurhadi, E., Arinal, V., Patricia, A., Wati, S. S., Bila, S., Tinggi, S., Komputer, I., & Karya, C. (2023). Implementasi alat pemberi pakan ikan otomatisasi menggunakan iot implementation of an automated fish feeding tool using iot. 6, 171–176.
Pratisca, S., & Sardi, J. (2020). Alat Pemberi Pakan Ikan Otomatis Berbasis Suhu Air pada Kolam Ikan. JTEIN: Jurnal Teknik Elektro Indonesia, 1(2), 193–200. https://doi.org/10.24036/jtein.v1i2.81
Rahma, A. A., Nurlaela, R. S., Meilani, A., Saryono, Z. P., & Pajrin, A. D. (2024). Ikan Sebagai Sumber Protein dan Gizi Berkualitas Tinggi Bagi Kesehatan Tubuh Manusia. Karimah Tauhid, 3(3), 3132–3142. https://doi.org/10.30997/karimahtauhid.v3i3.12341
Rupawan, R., Nasution, Z., & Arifin, Z. (2017). Analisis Finansial Pembesaran Ikan Betutu (Oxyeleotris Marmorata Blkr) Dalam Hampang Di Lahan Rawa Lebak Sumatbra Selatan. Jurnal Penelitian Perikanan Indonesia, 2(3), 50. https://doi.org/10.15578/jppi.2.3.1996.50-55
Safii, M., & Syaddam. (2021). Sistem Otomatis UntukSafii, M., & Syaddam. (2021). Sistem Otomatis Untuk Pemberian Pakan Ikan Di Aquarum. Jtst, 02(02), 13–24. Pemberian Pakan Ikan Di Aquarum. Jtst, 02(02), 13–24.
Sapkota, K., Chaudhary, S. M., Bhandari, L., Magar, M. B., Chaudhary, B., Jha, S. K., Pandey, P., & Shrestha, J. (2022). Growth and production of monosex tilapia (Oreochromis niloticus L.) under different levels of stocking densities. SAARC Journal of Agriculture, 20(2), 247–259. https://doi.org/10.3329/sja.v20i2.63585
Setiyowati, D., & Sulistyowati, D. R. (2018). PEN CULTURE Sebagai Solusi Peningkatan Pendapatan Nelayan Rajungan Di Jepara. JPPM (Jurnal Pengabdian Dan Pemberdayaan Masyarakat), 2(1), 139. https://doi.org/10.30595/jppm.v2i1.1785
Skad, C., & Nandika, R. (2020). PERANCANGAN ALAT PAKAN IKAN BERBASIS INTERNET OF THING (IoT). Sigma Teknika, 3(2), 121–131. https://doi.org/10.33373/sigma.v3i2.2744
Wiwi, M. H., & Ode, R. P. (2023). Prototype Pakan Ikan Berbasis Arduino Uno dengan Menggunakan Modul Ds1307 (Vol. 7). https://doi.org/10.31004/jptam.v7i2.9312
Yazid Al-Basthomi, M. (2023). Pengelolahan Risiko Rantai Pasok Produk Olahan Bandeng Pada Ud. Arshaindo Menggunakan Metode House of Risk. JUSTI (Jurnal Sistem Dan Teknik Industri), 4(1), 45. https://doi.org/10.30587/justicb.v4i1.6710
License
Copyright (c) 2026 Bahtiar Hamar, Muhammad Hibrian Wiwi, Muhammad Fazrun
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
